Viking Interlude 445 User's Guide download pdf (Page 9)

7

a

b

1

3

2

4

5

6

7

Learn your Interlude

Threading the Upper Thread

Make sure the presser foot is raised and

the needle is in the up position

1 Pull the spool pin out. Place the

thread on the spool pin and the spool

holder on the spool pin as described.

Push the spool pin back in.

2 Bring the thread in the direction of

the arrow under the thread guide (a)

and over the thread guide (b).

3 Bring the thread down between the

thread tension discs.

4 Continue threading by drawing the

thread from the right into the slot on

the take-up lever.

5 Thread last guide just above the

needle.

6 The needle is threaded from front to

back. The white on the presser foot

ankle makes it easy to see the eye of

the needle.

7 Place thread under the presser foot

and into the thread knife where it is

cut.

Threading for Twin Needle

!

Turn off the main switch.

1 Insert a twin needle.

2 Use a second thread spool or wind a

bobbin with the thread you are going

to use as the second upper thread.

3 LEFT NEEDLE: Thread the machine and

check to ensure that the thread lies

between the inner thread tension discs,

and inside the last thread guide. Thread

the left needle.

4 Attach the extra spool pin onto the

machine. Place a spool holder under

the thread.

5 Place the bobbin with the second

thread on the spool pin.

6 RIGHT NEEDLE: Thread the machine

as before but this thread should lie

between the outer thread tension

discs, outside the lowest thread guide.

Thread right needle.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Comments to this Manuals

No comments