Viking Interlude 445 User's Guide download pdf (Page 53)

51

Care of your Interlude

Fabric Does Not Move?

• Feed teeth up.

• Increase stitch length.

Bobbin Thread Breaks?

• Wind a new bobbin.

• Replace the bobbin in the machine,

check correct threading, page

10

• If stitch plate hole is damaged -

replace stitch plate.

• Clean bobbin area.

Bobbin Winds Irregularly?

• Check threading for bobbin winding.

Wrong Stitch, Irregular or Narrow

Stitches?

• Turn machine off and on to reset.

• Change needle, rethread top and

bobbin threads.

• Use stabilizer.

Machine Sews Slowly?

• Check speed

• Remove stitch plate and brush lint

from bobbin and teeth area.

• Have the sewing machine serviced at

your dealer.

Machine Will Not Sew?

• Put bobbin winder spindle up into

sewing position.

• Check plugs are all the way into

machine.

• Check wall plug and power to wall

plug.

Have your Interlude

Serviced Regularly by your

Husqvarna Viking Dealer!

If you have followed this trouble

shooting information and still are having

sewing problems, take the sewing

machine to your dealer. If there is a

speciﬁ c problem, it is a great help to

test sew with your thread on a scrap of

your sewing fabric and bring it to your

dealer. A sewing sample will often give

much better information than words.

Non-Original Parts and Accessories

The Interlude warranty does not cover

any defect or damage caused by use of

non-original accessories or parts.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments