Viking Interlude 445 User's Guide download pdf (Page 12)

10

1

2

10 15

a

2

b

c

1

34

Learn your Interlude

Placing the Bobbin in the

Machine

!

Turn off the main switch.

1 Remove the bobbin cover by sliding

it towards you.

2 Place the bobbin in the bobbin case

with the mark facing up and

the thread to the left of the bobbin.

The bobbin will then rotate counter

clockwise when pulling out the

thread.

3 Place your ﬁ nger on the bobbin to

keep it from turning as you pull the

thread ﬁ rmly to the right and then

to the left into the tension spring (a)

until it ‘‘clicks’’ into place.

4 Continue threading around (b) and

to the right of and then left into the

thread cutter (c). Replace the cover

(1). Pull the thread to the left to cut

it (2).

Lowering the Feed Teeth

The feed teeth are lowered when you

turn the dial on the front of the free

arm to the left . Turn the dial to the

right if you wish to raise the feed

teeth. The feed teeth will raise as you

begin to sew. The feed teeth should be

lowered when sewing on buttons and

for free-motion work.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Comments to this Manuals

No comments