Viking Interlude 445 User's Guide download pdf (Page 52)

50

Care of your Interlude

Trouble Shooting

Any Time You Experience

a Problem When Sewing:

• Enter correct type and weight of

fabric in the Sewing Advisor (445).

• Insert new needle size and type as

recommended on the InfoDisplay

(445).

• Rethread the top and bobbin threads.

• Use different spool pin positions

(vertical or horizontal).

• Use thread nets and quality thread.

We recommend the same sewing

thread on top and bobbin for general

sewing. For decorative sewing we

recommend embroidery thread on top

and regular sewing thread on bobbin.

Fabric Puckers?

• Enter correct type and weight of

fabric into the Sewing Advisor (445).

• Check needle, it could be damaged.

• Insert new needle size and type as

recommended on the InfoDisplay

(445).

• Rethread top and bobbin threads.

• Change thread type to match ﬁ ber

and sewing technique.

• Use quality thread

• Shorten stitch length

• Use stabilizer

• Check your thread tension

Skipped Stitches?

• Check needle - it could be damaged.

• Change needle to recommended size

and type.

• Be sure the needle is inserted

correctly and all the way into the

clamp.

• Rethread top and bobbin threads.

• Use recommended presser foot.

• Turn machine off and on to reset.

• Consult your dealer for service.

Needle Breaks?

• Use care not to pull fabric when

sewing.

• Insert new needle size and type as

recommended on the InfoDisplay

(445).

• Insert needle correctly as page

12

explains.

Poor Tension?

• Enter fabric weight and type in

Sewing Advisor (445).

• Rethread top and bobbin - use quality

thread.

• Insert new needle size and type as

recommended on the InfoDisplay

(445).

• Follow recommendations for thread

tension.

• Follow recommendations for stabilizer.

Upper Thread Breaks?

• Does thread feed smoothly/not

catching?

• Use thread nets and quality thread.

For special threads such as metallic

etc please consult your Accessory

User’s Guide for special needle

recommendations.

• Rethread top and bobbin threads -

check for correct threading.

• Try different spool pin positions

(horizontal or vertical).

• If stitch plate hole is damaged,

replace stitch plate.

• Is the correct spool holder used in

front of the thread?

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments