Viking Interlude 445 User's Guide download pdf (Page 51)

Care of your Interlude

Care of the Machine

To keep your sewing machine operating

well, clean it often. No lubrication

(oiling) is needed.

Turn off the main switch.

Cleaning

Wipe the exterior surfaces of your

Interlude with a soft cloth to remove

any dust or lint built up.

Clean the Bobbin Area

Remove the presser foot and slide off

the bobbin cover. Lower the feed teeth.

Place the stitch plate opener on the

brush, and then in the recess at the rear

of the stitch plate. Turn toward you to

pop off the stitch plate. Clean the feed

teeth with the brush.

Cleaning Under the Bobbin Area

When lint builds up, the area under the

bobbin case must be cleaned.

Remove the bobbin case holder (1)

covering the front part of the bobbin

case (2). Remove the bobbin case by

lifting it up. Clean with the brush.

Replace the bobbin case and the bobbin

case holder.

Replacing the Stitch Plate

With feed teeth down, place the stitch

plate about 5 mm in front of the rear

edge and push it back. Slide on the

bobbin cover. Raise the feed teeth.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

No comments

Viking Interlude 445 User's Guide Page 51