Viking Interlude 445 User's Guide download pdf (Page 43)

Sewing

Button

Sew buttons, snaps, hook and eyes

quickly with your Interlude.

Fabric: Woven medium

445

435

Use the clearance plate to create a

thread shank. Snap off the

presser foot

and lower the feed teeth by turning the

dial on the free arm to .

Adjust stitch settings so that the stitch

length is 0.0 and the width is 3.0. Set

thread tension to 4 and presser foot

pressure to 6.

Sew:

• Place the thin end of the clearance

plate under the button when sewing

on light fabrics. Hold in place with

transparent tape. Use the thick end

for heavier fabrics.

• Place the button under the ankle

with the holes in the button lined up

with the swing of the needle. Check

the swing of the needle by touching

the mirror side to side button

to be sure the needle will not hit the

button. Bring the needle down into

the hole of the button with the hand

wheel to verify.

• Zigzag button in place with six to

eight stitches.

• Touch to tie off.

• Raise feed teeth when button sewing

is completed.

• To deactivate the

STOP function touch

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

No comments

Viking Interlude 445 User's Guide Page 43