Viking Interlude 445 User's Guide download pdf (Page 6)

Learn your Interlude

Connecting the Foot Control

Among the accessories you will ﬁ nd the

foot control cord and the main cord.

Connecting the foot control cord to

the foot control is only necessary the

very ﬁ rst time you are going to use the

machine.

1 Take out the foot control cord. Turn

the foot control over. Connect the

cord to the socket inside the space of

the foot control.

2 Push ﬁ rmly to make sure it is

properly connected.

3 Put the cord through the slot on the

right hand side of the foot comtrol.

Connect to the Power Supply

On the underside of the machine you will

ﬁ nd information about the power supply

(V) and the frequency (Hz).

Before plugging in the foot control, check to ensure that

it is of type “FR4” (see underside of foot control).

1 Connect the foot control cord to the

front socket on the bottom right side

of the machine.

2 Connect the power cord to the rear

socket on the bottom right side of the

machine.

3 When you press the power switch to

ON, both the machine and the light

are switched on.

For the USA and Canada

This sewing machine has a polarized

plug (one blade wider than the other). To

reduce the risk of electric shock, this plug

is intended to ﬁ t in a polarized outlet only

one way. If the plug does not ﬁ t fully in the

outlet, reverse the plug. If it still does not ﬁ t,

contact a qualiﬁ ed electrician to install the

proper outlet. Do not modify the plug in any

way.

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

No comments

Viking Interlude 445 User's Guide Page 6