Viking Emerald 183 Owner's Manual download pdf (Page 24)

4.2. Function buttons

4.2.1. Direct Stitch Selection buttons (A)

When menu one is active, use the direct stitch

selection buttons to choose your stitch. Press the

buttons 0 to 9 to immediately select the stitch

illustrated on that button.

4.2.2. Stitch Width (B)

The stitch width is set in the same manner as the

stitch length. The preset width is visible on the

InfoDisplay. The width can be adjusted between

0 and 7 mm. If a straight stitch is selected, the

width button is used to adjust the needle position

to the left or right.

4.2.3. Stitch Length (C)

When you select a stitch, the machine

automatically sets the best stitch length. The

stitch length is visible on the lnfoDisplay. You

can change the stitch length by pressing the + or

- button.

4.2.4. Menu Selection button (D)

Press the Menu Selection button to select different stitch menus. The direct stitch selection mode

(menu one) is always selected when the machine is turned on. There are five different stitch menus;

two utility stitch menus, and 3 decorative stitch menus. By looking at the LED lights to the right of

the screen, you can see which menu is selected.

There is also an alphabet menu with lower and uppercase letters and numbers. For more information

about the stitches, Appendix A. Stitches starting on page 45.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

No comments

Viking Emerald 183 Owner's Manual Page 24