Viking Huskylock 936 User's Guide download pdf (Page 54)

1~2mm

—50—

Lower cutter

Lowest position

Upper cutter

Set screw

5-2. Cleaning after sewing

Unplug the machine.

1. Open the front cover (page 3) and free arm

cover (page 8).

2. Remove all the lint with the brush from the

accessory box.

5-3. Storage

1. When the machine is not in use, disconnect it

from the power supply.

2. Cover the machine with the vinyl cover when

you have ﬁ nished sewing.

3. Store the machine so that it is not directly

exposed to sunlight or humidity.

5-4. Replacing the lower cutter

Cutters are available as an accessory at your

authorized Husqvarna dealer.

Unplug the machine

1. Open the front cover (See page 8).

2. Disengage upper cutter and turn to lowest

position.

3. Loosen the screw of the lower cutter and

remove the cutter.

4. Mount the new cutter.

5. Re-position the upper cutter.

6. Turn the handwheel so that the needles are

in their lowest position.

7. Make sure that the front edge of the cutter is

1~2 mm lower than the cutting edge of the

lower cutter.

8. Tighten the new cutter with the screw.

9. Always clean with the brush.

5-5. Lubrication

To make the machine run smoothly and quietly

some of the moving parts must be lubricated

once or twice a month when using the ma-

chine normally and once a week when using it

frequently. Always remember to unplug the ma-

chine for service. Remove all excess oil before

you start sewing to avoid staining your project.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 77 78

Comments to this Manuals

No comments