Viking ES-3 Manual download pdf (Page 1)

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

COMMUNICATION & SECURITY SOLUTIONS

Add Keyless Entry and/or Card Reader Entry for a

Single Door with Up to 250 Users

Features

The ES-1 is a door controller designed to operate

a door strike or magnetic lock upon receiving a

valid card read and/or keyless entry code from Wie-

gand devices. One ES-1, one or two Wiegand de-

vices and a door strike or magnetic lock of your

choice is required for each entry point.

The Wiegand device used may be the Viking

model PRX-1 Proximity Card Reader and/or the

PRX-2

Proximity Card Reader with Keypad, PRX-

3 Medium Range Proximity Card Reader or

PRX-4 Wiegand Output Keypad or any other card

reader, RF transmitter or digital keypad that outputs

the 26 bit Wiegand format. If two Wiegand devices

are used, one can be placed on each side of a

doorway to control access in both directions (entry

and exit). Up to 250 valid Wiegand codes can be

programmed into the ES-1.

Other programmable parameters, like relay activa-

tion, mode (normal, off, or open) and facility codes

are also stored in non-volatile memory. All program-

ming is done with a local touch tone phone. Up to

three ES-1s can be programmed simultaneously if

they will be sharing all the same programming

codes and parameters. Entry logging is possible

with the ES-1’s log bus data output.

• Up to 250 tenants

• Program and control with a Touch Tone phone

• Use with any 26 bit Wiegand device

• Supports 1 entry point

• Compatible with Viking models PRX-1, PRX-2

PRX-3, and PRX-4 and certain legacy 125KHz

HID® proximity card readers*

• Non-volatile memory (no batteries required)

• LOG BUS data output for logging entry events

• Card plus keypad mode for highest security

• One time codes for visitors

• Bi-directional (entry and exit) control

• Business entrances

• High rise apartment buildings

• Condos

• Senior citizen buildings

• Assisted care centers

• Retirement homes

• Gated communities

Power: 120V AC/12V DC 500mA, UL listed adapter pro-

vided or use any 12-24V AC or DC source @ 100mA (de-

signed to share power with the door strike’s power supply)

Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x

1.75”)

Shipping Weight: 1.3 kg (3 lbs)

Environmental: 0° C to 32° C (32° F to 90° F) with 5%

to 95% non-condensing humidity

Relay Contact Ratings: 5A @ 30V DC/250V AC maxi-

mum

Maximum Wiegand Length: 152m (500 ft) - 24 AWG

Maximum LOG BUS Length: 1610m (5280 ft - 1 mile),

24 AWG

Connections: 11 screw terminals, (1) RJ-11 telco jack

ES-1

Stand Alone Door

Controller Entry System

February 4, 2014

Applications

Specifications

www.vikingelectronics.com

Information: (715) 386-8861

VIKING

* HID and the HID logo are registered trademarks of HID

Global Corporation, an ASSA ABLOY company. All other

trademarks are the property of their respective owners.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - PRODUCT MANUAL

PRODUCT MANUALDesigned, Manufactured and Supported in the USACOMMUNICATION & SECURITY SOLUTIONSAdd Keyless Entry and/or Card Reader Entry for aSin

Page 2 - Definitions

InstallationDefinitionsA. Basic WiringIMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC

Page 3 - Programming

ProgrammingStep 1. Connec t a touch tone phone to the PROGRAM PHONE jack.Step 2. Come off-hook. A double beep will indicate that programming has been

Page 4

1. Programming a single Entry Code3. Programming One Time Entry Codes4. Deleting the Entry Code for One Memory Location5. Deleting all Entry Code

Page 5 - Q + last location

E. Facility Codes F. Entry Point ID Number G. Relay Activation TimeI. Programming Features Quick Reference H. Beep Tones5A Wiegand type

Page 6 - Simulated LOG BUS Output

B. Tenant Keyless EntryC. Card Plus Keypad EntryTouch Tone CommandDescriptionQ 0 To put the ES-1 in the OFF mode ( no cards or keyless entry num

Page 7 - Relay Activation Code:

Please use this chart to record the numbers programmed into the ES-1 (USE PENCIL)Security Code:Relay Activation Code:Memory Location Tenant’s Name Ent

Page 8 - Relay Activation Time

Printed in the U.S.A.IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666Our Technical Support Department

Viking ES-3 Manual Page 1

Browse online or download Manual for Security door controllers Viking ES-3. Viking ES-3 Product manual User Manual

Summary of Contents

More documents for Security door controllers Viking ES-3

Comments to this Manuals

Viking ES-3 Manual Page 1

Browse online or download Manual for Security door controllers Viking ES-3. Viking ES-3 Product manual User Manual

Summary of Contents

More documents for Security door controllers Viking ES-3

Comments to this Manuals

Related products and manuals for Security door controllers Viking ES-3