Viking VCBB363 Specifications Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
26
CUSTOM FINISHING OPTIONS
Door Clearances
All installations must allow for the refrigerator and freezer door to open a minimum of 90
o
.
•For side wall or corner installation, allow for a standard 3” (7.6 cm) cabinet filler to assure doors open to 90
o
. If a
custom handle is used a wider filler may be necessary.
•Panel thickness must not exceed 1” (2.5 cm) on hinge side. Thicker panels will interfere with door swing and
clearance.
•Panels must not exceed 50 pounds per door.
Door Panel Requirements
Verify panel sizes, handle clearances, and placement before beginning installation. See “Custom Panel Dimensions” on
page 21.
•In some instances, raised panels may require a handle recess (see page 10).
•Panels thicker than 1” (2.5 cm) require special consideration with door swings and clearances (see page 9-10).
Custom Air Grille Panel (Optional)
A louvered aluminum air grille is supplied with the
refrigerator. For custom wood grille application see
template in “Custom Air Grille Panel Dimensions” on pages
31-32.
Right hinge application:
Item Qty Description Size
A 2 End 3”x 3-3/4” x 3/4”
B 2 Top & Bottom See page 28
C 2 Insert End 1-1/2” x 2-3/4” x 3/4”
D 1 Hinge Cover See page 29
E 1 Insert See page 29
IInnssttaallll wwoooodd ggrriillllee bbyy ccoommpplleettiinngg tthhee ffoolllloowwiinngg::
1. Remove air grille center blade.
2. Remove (2) 1/4” (.6 cm) screws with a magnetic extended screwdriver at least 8” (20.3 cm) long.
3. Pull air grille assembly forward.
4. Remove (2) mounting brackets from the air grille assembly.
5. Using (8) screws removed from the mounting brackets, attach mounting brackets to the custom wood grille using
predrilled pilot holes. (See page 27 for proper alignment of custom air grille to mounting brackets and pilot hole
placement.)
6. Replace air grille assembly by reversing Step 2.
C
A
E
B
A
D
Optional 1/2” (1.3 cm) hinge cover
is fastened to bottom of wood
grille. (Hinge cover will protrude
9/32” [0.7 cm] from wood grille.)
Wood grille is made
of 3” (7.6 cm) filler
stock.
Screws
BracketCustom air grille front
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments