Viking VGIC5304BSS Installation Guide download pdf (Page 11)

20 21

Reattach door to range.

Open door completely. Reattach hinge trim.

Remove pins from hole in hinges.

Close door.

If the door needs to be adjusted, loosen hinge trim screws located in

step 2. Adjust the screws located between the door and kickplate using a

5/32” hex head allen wrench. After adjustment, tighten hinge trim screws.

Door Replacement and Adjustment

Burner caps and burner bowls are packed in styrofoam

top pack with the grates. Place burner bowl in grate

support and burner cap on top of burner. Place burner

grate over burner cap and on top of grate support.

”

3/8”

(

)

(0.95 cm)

”

(

)

Check that unit is level side to side

and front to back. The side trim must be 3/8” (0.95 cm)

above countertop. If unit is not level repeat steps 5-7

of “Leveling/Adjustments/Alignment” section.

Slide range into place. Be sure

anti-tip bracket slides into the anti-tip opening.

Final Installation

1 2 ... 6 7 8 9 10 11 12

No comments

Viking VGIC5304BSS Installation Guide Page 11