Viking VCWH Installation Guide download pdf (Page 2)

Table of Contents

Warnings & Important Information

________________________________________________________ 3-

VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”

Dimensions & Specifications _____________________________________________________ 5

Clearance Dimensions ___________________________________________________________ 6

Interior Ventilator Dimensions ____________________________________________________ 7

VWH 18”H. 24”/27” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”

Dimensions & Specifications ______________________________________________________ 8

Clearance Dimensions _____________________________________________________________ 9

Interior Ventilator Dimensions _____________________________________________________10

Exterior Ventilator Dimensions ___________________________________________________ 11

VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”

Dimensions & Specifications _____________________________________________________ 12

Clearance Dimensions __________________________________________________________ 13

Interior Ventilator Dimensions ___________________________________________________ 14

Exterior Ventilator Dimensions ___________________________________________________ 15

VIH Island Hoods 36”, 42”, 54”, & 66”

Dimensions & Specifications _____________________________________________________ 16

Clearance Dimensions___________________________________________________________ 17

Interior Ventilator Dimensions ___________________________________________________ 18

Exterior Ventilator Dimensions ___________________________________________________ 19

VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”

Dimensions & Specifications _____________________________________________________ 20

Clearance Dimensions___________________________________________________________ 21

Interior Ventilator Dimensions ___________________________________________________ 22

Exterior Ventilator Dimensions ___________________________________________________ 23

Planning Information________________________________________________________________ 24

Installation Procedures

Installation (VWH 10”H. Wall Hoods w/Standard Ventilator) __________________________ 25

Duct Cover Option (VWH 10”H. Wall Hoods w/Standard Ventilator)___________________ 27

Installation (VWH 10”H. Wall Hoods w/Recirculating Kit)_____________________________ 27

Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods) ________________________ 30

Duct Cover Option (VWH 18”H. Wall Hoods)_______________________________________ 31

Duct Cover Option (VCWH Chimney Wall Hoods) __________________________________ 32

Installation (VIH/VCIH Island Hoods) ______________________________________________ 33

Wiring Diagram ____________________________________________________________________ 35

Service & Registration_______________________________________________________________ 36

IMPORTANT–Please Read and Follow!

NOTE:

If installing hood with warming shelf panel,

install warming shelf panel first.

IMPORTANT – PLEASE READ AND FOLLOW

• Before beginning, please read these instructions

completely and carefully.

• Do not remove permanently affixed labels, warnings, or

plates from the product. This may void the warranty.

• Please observe all local and national codes and

ordinances. If no local codes are applicable, wire in

accordance with the National Electrical Code,

ANSI/NFPA 70-latest edition.

• Outdoor approved models should be installed in a

covered non-enclosed area and should be protected

from the elements as much as possible.

• The installer should leave these instructions with the

consumer who should retain for local inspector’s use and

for future reference.

• Check with a qualified and trained installer or local codes

for makeup air requirement, if any.

This hood is for residential installation only and is not

designed for installation over a commercial product. Make

sure power is off at the main circuit breaker or fuse box

before making connections. To avoid risk of fire, electric

shock, or injury to persons, turn off the electricity to the

hood from the power supply before servicing or cleaning.

Viking hoods are equipped with variable speed control

blowers. These units will not function with a single speed

ventilator. All Viking Range ventilator kits are designed

specifically for use with Viking Range hoods. Use of any

non-Viking Range ventilator kit will void the hood warranty.

Viking hoods are equipped with the variable speed

controls for blowers. These units will not function with a

single speed ventilator. All Viking ventilator kits are

designed specifically for use with Viking hoods. Use of any

non-Viking ventilator kit will void the hood warranty.

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G

TO REDUCE THE RISK OF A RANGETOP

GREASE FIRE:

1. Never leave surface units unattended at high

setting. Boilovers cause smoking and greasy

spillovers that may ignite. Heat oils slowly on

low or medium settings.

2. Always turn hood ON when cooking at high

heat or when cooking flaming foods. (i.e.

Crepes suzette, Cherries jubilee, Peppercorn

beef flambé).

3. Clean ventilating fans frequently. Grease should

not be allowed to accumulate on fan or filter.

4. Use proper pan size. Always use cookware

appropriate for the size of the surface element.

TO REDUCE THE RISK OF FIRE, ELECTRICAL

SHOCK, OR INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

1. Installation work and electrical wiring must be

done by qualified person(s) in accordance with

all applicable codes and standards, including

fire-rated construction.

2. Sufficient air is needed for proper combustion

and exhausting of gases through the flute

(chimney) of fuel burning equipment to prevent

back drafting. Follow the heating equipment

manufacturer’s guideline and safety standards

such as those published by the National Fire

Protection Association (NFPA), and the

American Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the

local code authorities.

3. When cutting of drilling into wall or ceiling, do

not damage electrical wiring and other hidden

utilities.

4. Ducted fans must always be vented to the outdoors.

5. WARNING!: To reduce risk of fire, use only

metal ductwork

6. CAUTION!: To reduce risk of fire and to

properly exhaust air, be sure to duct air outside.

Do not vent exhaust air into spaces within walls

or ceilings, or into attics, crawl spaces, or

garages.

7. CAUTION!: To Reduce the Risk of Fire and

Electric Shock, Install this rangehood only with

remote blower models manufactured by Viking,

model numbers – DEV900/DEV1200,

VEV900/VEV1200, OR DEV1500, VEV1500 or

integral blowers manufactured by Viking, model

numbers – DIV300, DIV440, DIV600, DIV800,

DIV1200, VIV300, VIV600, or VIV1200. NOTE –

Please refer inside for specific canopy/blower

combinations.

W A R N I N G

To reduce the risk of fire, electric shock, or injury

to persons, observe the following:

• Use this unit only in the manner intended by the

manufacturer. If you have any questions, contact

the manufacturer.

• Before servicing or cleaning unit, switch power off

at service panel and lock service panel to prevent

power from being switched on accidentally. When

the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such

as a tag, to the service panel.

1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments

Viking VCWH Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Cooker hoods Viking VCWH