Viking DEV1200 User Manual download pdf (Page 4)

GREEN

WHITE

BLACK

WHITE

GREEN

BLACK

WHITE

GREEN

ROUGH-IN PLATE LEAD

WIRING BOX

EXTERIOR

VENTILATOR

BLACKBLACK

BROWN

CAPACITOR

WHITE

BLUE

BLACK

GREEN / YELLOW

GROUND

LINE IN

120 VAC

60 HZ

10 A MAX.

99043051D

F20221

1. Run 10" round steel ductwork, from exterior ventilator to

the installation location. For best performance, use the

straightest possible duct run and the fewest number of

elbows. Tape all joints.

2. Run 120 VAC electrical power cable from service panel

and from remote ventilator to installation location.

3. Remove wiring box cover. Remove knockouts from the

wiring box. Feed 6" of power cable through openings and

attach cables to wiring box with appropriate connectors.

VIKING RANGE CORPORATION

GREENWOOD, MISSISSIPPI 38930 USA

4. Wire black to black, white to white, and green or bare wire

beneath green ground screw. Replace wiring box cover.

5. Connect ductwork to transition and tape joint.

6. Turn on power and check ventilator operation.

INSTALL THE ROUGH-IN PLATE USE AND CARE

Disconnect electrical power supply and lock out service

panel before cleaning or servicing this unit.

CLEANING

Remove cover and carefully vacuum ventilator and inside of

housing. Be careful not to bend or otherwise damage

ventilator wheel.

MOTOR LUBRICATION

The motor is permanently lubricated. Do not oil or

disassemble motor.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Viking DEV1200 User Manual Page 4

Comments to this Manuals

Related products and manuals for Cooker hoods Viking DEV1200