Viking K-1900-8 User Manual download pdf (Page 2)

Installation

The K-1900-1 connects in series between a Touch Tone telephone and a C.O. line or analog PABX/KSU extension.

Programming

a. Connect the K-1900-1 to a C.O. line or analog PABX/KSU station.

b. From a Touch Tone phone, call the line connected to the K-1900-1.

c. Take the phone connected to the dialer off hook (answer the phone).

d. Momentarily press the programming button on the front of the K-1900-1 or enter ✱ followed by the six digit

security code (see section C). A double beep should be heard and the programming LED should light indicating

you have entered programming.

B. Programming Features

Telephone number memory positions 00-09 (1-32 digits) .........................................

Telephone number memory positions 10-99 (1-16 digits) .........................................

Clear all speed dial numbers from memory .............................................................

Dedicated dialer mode (factory setting) (see Operation/Applications section A) ...

Speed dialer mode (see Operation/Applications section B) .................................

Disable hang up before speed dialing in dedicated dialer mode ..............................

Hang up before speed dialing (factory setting) ........................................................

Emergency number position one (1-32 digits, factory set to 911) ...........................

Emergency number position two (1-32 digits, factory set to 311) ...........................

Security code (factory set to 845464) ......................................................................

To add a ✱ at any point in the dialing string .............................................................

To add a # at any point in the dialing string .............................................................

Set dialing speed to normal (DTMF:120ms on/off, Pulse:10pps. factory setting) .....

Set dialing speed to fast (DTMF: 50ms on/off, Pulse: 20pps) ..................................

Restrict user dialing in dedicated dialer mode (factory setting) ................................

Enable user dialing in dedicated dialer mode ..........................................................

Set pause before dialing to normal (approximately 1 second, factory setting) .........

Set pause before dialing to short (approximately .5 seconds) .................................

To add a four second pause at any point in the dialing string ..................................

To add a one second pause at any point in the dialing string ..................................

Touch Tone speed dialing (factory setting) ..............................................................

Pulse speed dialing ..................................................................................................

*Notes: Special features such as a pause, a Touch Tone “✱” and a Touch Tone “#”, use a single digit in the speed

dialing string.

A. Accessing the Programming Mode

1. Remote Programming (with or without a security code)

2. Local Programming (without the Security Code)

a. Connect the K-1900-1 to a C.O. line or analog PABX/KSU station.

b. Press and hold the programming button on the front of the K-1900-1.

c. Take the phone connected to the dialer off hook. A double beep should be heard in the phone and the

programming LED should light indicating you have entered programming. Release the button and begin

programming.

Phone number

###

##0

##1

##2

##4

Phone number

6 digits (0 - 9)

✱✱

✱#

✱1

✱2

✱3

✱4

✱5

✱6

✱7

✱8

✱9

✱0

# 00-09

# 10-99

##5

##6

##8

Touch Tone

Phone

Programming button and indicator LED

C.O. line or

analog PABX/KSU

extension

Enter Digits

Memory

Location+

Note: All valid Touch Tone programming sequences are acknowledged with a double beep. A triple beep indicates

that a mistake has been made.

VIKING©

K-1900-1

PROGRAM

100 NUMBER

AUTO DIALER

PHONE

1 2 3 4

Comments to this Manuals

No comments

Viking K-1900-8 User Manual Page 2

Comments to this Manuals

Related products and manuals for Security access control systems Viking K-1900-8