Latch
Relay
#141
#241
#341
#4
41
Un-Latch
Relay
#140
#2
40
#340
#440
Activate
Momentarily
#144
#244
#344
#444
Entry
Relay
1
2
3
4
Model
E-10
E-15
E-20A
E-30
K-1700-3
K-15007
(left)
K-1900-8
(right)
C. Gate/Door Release
Tenants may activate the relay without calling out to the entry
phone. Refer to the chart at the right for dialing strings. When
a tenant momentarily activates a relay, it will activate for the
amount of time specified in Programming, section F.
D. Privacy Number
If a privacy number has been programmed, an off hook entry phone is given 4 seconds of dial tone to allow the visitor
to enter the Touch Tone access code. The correct number will ring the house phones, an incorrect number will be dis-
connected. If a privacy number is not programmed, then an off-hook entry phone will immediately ring the house
phones. Note: The “Privacy Number” may be programmed with the first 6 digits of the actual phone number. Visitors
may dial the tenant’s actual 7-digit phone number as if they are making an actual C.O. call.
E. Entry Codes
Touch Tone entry codes may be used by the tenants to provide keyless entry. Each entry phone may have its own
entry code. There is also a master entry code which is usable at all four entry locations. If an entry code has been
programmed, an off-hook entry phone is given 4 seconds of dial tone before ringing the house phone. During this time
a Touch Tone “#” + the “entry code” may be entered. A correct entry code will provide a timed relay activation for that
entry phone location. Note: A short buzz indicates when the relay has been activated.
F. Auxiliary Inputs/Contacts
A momentary contact closure on the “Aux Contacts Input” or a momentary logic level 1 (5V DC) on the “Aux Logic Input”
will produce a timed “Aux Contacts” activation. The auxiliary input contacts may be used to provide an additional relay
or may be used to add doorstrike entry to an entry phone that does not have a Touch Tone keypad. The auxiliary input
contacts may also be used for timed operation of other devices such as yard lights, etc. and can be triggered by the
second set of door entry contacts.
G. Optional Equipment
The C-2000 is compatible with all
of the following Viking phones, as
well as any standard analog
phone.
All flush mount models shown
right may be surface mounted
using an optional back box. For
more information, retrieve Fax
Back Document 424.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 156 ZF301220 Rev BPrinted in the U.S.A.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
8
8
6
6
6
6
6
6
F
F
a
a
x
x
B
B
a
a
c
c
k
k
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
4
4
3
3
4
4
5
5
1. Auto-Answer
If auto-answer is required for monitoring, use Viking models E-10, E-20A, E-30 or K-1700-3 as entry phones.
2. Keyless Entry
If Touch Tone keyless entry is required, use Viking models K-1700-3 or K-1900-8. Alternatively, keyed or keyless
entry may be added to entry phones that do not have Touch Tone keypads by utilizing the AUX INPUT and a third-
party keypad at the entry location.
3. Camera Control
An LDB-1 or LDB-2 loop detect circuit may be added to start and stop camera operation.
210
210
210
212
157
352
362
Flush
Flush
Surface
Flush
Flush
Flush
Flush
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
N
Y
Y
N
Y
Y
Y*
N
N
Aluminum
Aluminum
Plastic
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
* Requires K-1700-3 (RD). See serial label to verify.
Mounting
Handsfree
Entry Keypad
Auto-Answer
Fax Back #
Material
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals