Viking TVDR6608BAW Specifications download pdf (Page 16)

Push supply cord toward terminal block to relieve

strain, reattach supply cord strain relief bracket over

supply cord.

Reattach access door.

Electrical Connection

3-Wire (con’t)

Electrical Connection

4-Wire

WARNING

ELECTRICAL SHOCK HAZARD

To avoid risk of electrical shock, personal injury

or death; verify your appliance has been properly

grounded in accordance with local codes or in

absence of codes, with the National Electrical Code (NEC) ANSI/

NFPA-70 – latest edition.

WARNING

ELECTRICAL SHOCK HAZARD

To avoid risk or electrical shock, personal injury

or death; grounding product to the frame of the

unit may or may not be permitted through your

local codes. If ground to the frame is not permitted then a 4

conductor power cord must be used.

See Electrical Requirements information. Where local codes do not permit grounding through neutral, use a 4-wire power supply

cord. The cord or conduit must be secured to the range with the strain relief bracket. The electrical connection is made at the

terminal block, which is located behind the access door on the back of the range.

Remove access door. Remove supply cord strain relief

bracket and three supply cord mounting screws

on terminal block.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Viking TVDR6608BAW Specifications Page 16