Viking Platinum 3000 Owner's Manual download pdf (Page 8)

Attaching Handle Bars

CAUTION - Unplug the Platinum

3000 from the electrical outlet. All power to the

machine must be turned off when installing the front handle bars. Failure to do so can result

in damage to the machine.

1. On the front of your machine there are four screws that the handlebar will attach to (g. 6).

2. To install handle bars lineup the holes on the handlebar bracket with the pre-drilled holes on the

front of the machine. Begin to thread a single screw into one of the holes until it catches, hand

tighten screw to secure (g. 7). Insert and hand tighten the remaining three screws. Using a

phillips head screw driver tighten handles securely to machine.

Attaching LCD Touch Screen

The Display Screen is your access to running and controlling the functions of your Platinum

3000.

The touch screen connects to the bracket on top of the handle bar.

1. Attach the display screen (g. 8) to the top center brackets on the handle bars (g. 9).

2. Remove the two screws on the handle bar bracket to attach the

display screen.

3. Mount the screen brackets to outside of the machine upper

brackets (g. 10).

4. Secure the screen with the two screws.

5. Adjust display screen to your visual preference (g. 11).

6. Remove protective lm over screen.

Fig. 6

Handle bars

Fig. 7

Fig. 8

Fig. 9 Fig. 10

Fig. 11

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

Viking Platinum 3000 Owner's Manual Page 8