Viking E-40 User Manual download pdf (Page 3)

TYPE 103 Page 3

Instructions for E-10 and E-40 Doorphones

In certain noisy locations (traffic or wind), the microphone volume may need to be decreased. A symptom of this is one-way talk path, in which the distant party

cannot be heard over the speaker. A “MIC VOL” adjustment is provided on the doorphone for increasing or decreasing the microphone volume.

Microphone Volume

DIP Position Description

Switch

1 ON Auto Answer - Doorphone answers when incoming call is detected.

2 ON Call Timer - See E-10 manual for a description of this feature. Recommended setting is “ON”. This is the factory default.

3 OFF Programming Mode - E-10 is factory pre-set, and normally does not need re-programming. Refer to E-10 manual

(Viking document which is included) for details

ON ON ON

1 2 3

ON ON ON

1 2 3

Spkr Vol

Mic Vol

Holovision recommends the default settings on the dip switches. See the E-10 or E-40 manual for more information.

The “SPKR VOL” pot can be adjusted to increase or decrease the speaker volume to the desired level.

Speaker Volume

Dip Switch Settings

ON ON ON ON

1 2 3 4

Instructions for C-2000A Controller

DIP Position Description

Switch

1 OFF Auxiliary Contact Mode - When any doorphone is activated (button is pushed), the auxiliary contacts will activate for

0.5 second. This is the factory default.

2 OFF Normal Operation Mode - Normally, this will be in OFF position to program C-2000A. See below.

3 ON Doorphone automatically disconnect (factory default).

4 ON Doorphone busy signal enabled (factory default).

Dip Switch Settings C-2000A

Doorphone Programming

1 2 3 4

Comments to this Manuals

No comments

Viking E-40 User Manual Page 3

Comments to this Manuals

Related products and manuals for Security cameras Viking E-40