Viking Alarm Dialers Manual

PRODUCT MANUALDesigned, Manufactured and Supported in the USACOMMUNICATION & SECURITY SOLUTIONSVoice Alarm Dialing from Two InputsFeaturesViking’s

Definitions2Alarm Dialer: The K-202-DVA calls the list of up to 7 phone numbers associated with an alarm input when the inputhas reached the alarm sta

Note: Correct programming entries are implemented and then acknowledged by two beeps. Incorrectprogramming entries are discarded and receive three bee

To program one of the seven phone numbers for each alarm input as a pager number enter: the desired 1-32 digit pagerphone number + #Q + XY (where X is

Enter one digit from 0-9 followed by #92. If the ring delay is set to 0, ring detection is disabled, so that the K-202-DVA will not answer incoming c

The PA mode allows the K-202-DVA to play recorded messages over a paging system. For a description of howthe mode functions, see Operation section B.

Once the message repeat count has been met without a response, the K-202-DVA will give a single beep to in-dicate that it has delivered its messages a

Printed in the U.S.A.DOD# 305ZF302420 Rev CDue to the dynamic nature of the product design, the information contained in this document is subject to c