Viking D3 Installation Guide download pdf (Page 7)

10 Mounting Oven to the Wall

Utilization of the carton may make installation easier.

figure

Top Side

Cutting Line

1) MOUNTING OVEN TO THE WALL: Place carton upside

down.

figure

(A)

(B)

2) MOUNTING OVEN TO THE WALL: Using cutting line

around the carton, cut into two pieces (A) and (B).

figure

3) MOUNTING OVEN TO THE WALL: Position oven to assist

in mounting to the wall.

figure

(

Wall

Space more

than wall

thickness

2) MOUNTING PLATE: Position the Mounting Plate with

the Toggle Bolts attached at the wall location and insert

Toggle Nuts and Bolts through the holes in the wall with

the Toggle Nuts closed. Use Wood Screws 1 to attach the

Mounting Plate to studs.

NOTE: Before insertion, be sure you leave a space more

than the thickness of the wall between the Mounting

Plate and the end of each of the Toggle Nuts (in the

closed position). If you do not leave enough space, the

Toggle Nut will not be able to open on the other side

of the wall. Also, once a Toggle Nut opens, it cannot be

withdrawn from the hole; therefore make sure all of the

Toggles are in the correct position before insertion.

figure

)

3) MOUNTING PLATE: Align the Mounting Plate carefully

and hold in position while tightening Toggle Bolts. Pull

Toggle Bolt toward you and turn clockwise to tighten.

9 Oven Installation

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Viking D3 Installation Guide Page 7