AUX. AUDIO
DEFAULT MSG.
AUX. AUDIO
In this application, the RAD-1 Remote Access Device will answer the line and trigger the message on the DVA-2WA
to play from the beginning.
C.O. Line
or Analog
PABX/KSU
Station
D. Single Line 7.5 Minute Digital Announcer
Step 1. Connect as shown.
Step 2. Turn DIP switch 5 ON.
Step 3. Program the RAD-1 as shown in the RAD-1 Technical Practice, Fax Back Document 410.
Important: The RAD-1 “Call Timer” must be programmed to a time long enough for the DVA-2WA to play its entire
message. Please refer to the RAD-1 Technical Practice, Fax Back Document 410.
In this application, the DVA-2WA is used in conjunction with a CTG-1 Clock Controlled Tone Generator (Fax Back
Document 460) to provide time activated promotional voice messages over an existing paging system.
AUX. AUDIO
DEFAULT MSG.
AUX. AUDIO
closing in 10 minutes.
to the check out...
E. Time Activated Messages Over a Paging System
* Note: Up to three 8-ohm speakers may be connected (not included). Viking models 25AE Paging Horn, 30AE Ceiling
Speaker or equivalent are recommended. For more information, retrieve Fax Back Document 498.
*
*
Comments to this Manuals