Viking VGR5606GQSS Installation Manual download pdf (Page 11)

11

The bottom of a standard hood should be

30” (76.2 cm) min. to 36” (91.4 cm) max.

above the countertop. This would

typically result in the bottom of the hood

being 66” (167.6 cm) to 72” (182.9 cm)

above the floor. Refer to the range hood

installation instructions for additional

information. These dimensions provide for

safe and efficient operation of the hood.

66”min.

(167.6 cm)

to

72”max.

(182.9 cm)

30”

(76.2 cm)

6”

(15.2 cm)

Wood/Composite

Overlay

30”min.

(76.2 cm)

to

36”max.

(91.4 cm)

66”min.

(167.6 cm)

to

72”max.

(182.9 cm)

24”

(61.0 cm)

Wood/Composite

Overlay

0”

(

0 cm)

30”min.

(76.2 cm)

to

36”max.

(91.4 cm)

Wall Installation

Island Installation

Note: This range comes standard with an

Island Trim. There must be a minimum of

6” (15.2 cm) clearance from rear of range

to a combustible wall or 0” clearance to

a non-combustible wall.

Note: Clearances from non-combustible

materials are not part of the ANSI Z21.1

scope and not certified by CSA.

Clearances to non-combustible materials

must be approved by the authority

having jurisdiction.

Note: Minimum clearance for back

wall is 0” with backguard or high-

shelf.

Clearance Dimensions (Wood/Composite Overlay)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments